Door Wood Profile Sander

  • Price:

    Negotiable

  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:

    Guangdong

  • Validity to:

    Long-term effective

  • Last update:

    2019-09-29 04:54

  • Browse the number:

    99

Send an inquiries

Company Profile

Foshan Sandwell Machinery Co.,Ltd.

By certification [File Integrity]

Contact:sandwell(Mr.)  

Email:

Telephone:

Phone:

Area:Guangdong

Address:Guangdong

Website:http://www.sandwell-sand.com/ http://sandwell.sz-jingymbz.com/

Product details

Intelligent heavy duty sanding machine (2019 models) Model: SDG13-T2A2P4L2

This machine is suitable for flat surface shaped blanks and paint sanding of flat door, flat carved door, painted door, solid wood frame door,etc. In addition to category products sanding,it can also be used for all kinds of plane products (such as window, photo frame, cabinet, bed, wood line, etc.) surface white billet, paint sanding.

Modular sanding parts design can be diversified according to different processes

Improve sanding efficiency by 3-10 times and reduce labor by more than 70%.

The equipment adopts heavy-duty structure and integral frame to ensure stable operation and sanding precision.


Sanding features:

1. The machine is equipped with ten sets of sand units, which are composed of six sets of sand components.It equipped with feed automatic induction protection and sanding surface brush dust removal components.

2. Feed induction parts: automatically sense the width and position of the workpiece;

3, The first set of sanding parts, two groups of plane disk sanding groups to sanding the workpiece plane, the paint flow hanging, and uneven grinding, and breaking the paint surface.

4, The second set of sanding parts, two sets of transverse spiral roller forward and reverse sand groups shall be used to polish the transverse concave and convex surface of the workpiece and positive and negative turn both sides can sand in place.

5. The third and fourth sets of sanding parts, four groups of sanding units, 360 degree forward rotation and 360 degree reverse rotation respectively,to polish all corners of the workpiece.

6. The fifth and sixth sets of sanding parts, two sets of sanding units,they are positive and negative, large-area sanding roller large-area sanding, comprehensively smoothing the sanding of the first few sanding lights. Sanding the surface of the bump.

7. Dust-removing parts: Dust-removing the sanding surface to facilitate the next process.


Features:

1) This series of sanding machines has a wide processing range,it can be used for all kinds of workpieces with a sanding height of 150mm and a width of 1300mm.

2) All the automatic digital control of the whole machine is adjusted, the operation is simple and convenient and one click to start.

3) The system uses PLC to connect high-definition touch screen communication inverter to visual display, operation, adjustment, maintenance and indication.

4) One-key machine, hundreds of product code memory storage, suitable for a variety of different workpiece sanding quick adjustment.

5) The feeding position is automatically sensed, and the sanding roller automatically decelerates to effectively protect the head and tail of the workpiece.

6) The overall frame structure profile welding annealing aging treatment to ensure stable operation and sanding accuracy.

7) Modular production of sanding components, independent frequency control, independent lifting control, independent oscillation and swing, according to the different requirements of customer's products for sanding, custom equipment parts process configuration arrangement, to achieve the best sanding effect.

8) The conveying table is fixed, the sanding unit is floating on the whole, and the pressing material is independent, which is convenient for multi-machine automatic connection.


Mechanical parameter description

Equipment model

SDG13-T2A2P4L2

Workpiece width

50~1300 mm

Minimum length of workpiece

600 mm

Workpiece thickness range

10 ~ 150 mm

Lifting power

1.1 kw

Feeding power

2.2kw

Feeding speed

1 ~ 12m/min

Servo motor power

2.6kw

Plane disk sander

2×1.5 kw ×Φ180mm

Transverse spiral roller

2×1.5 kw 4×Φ280mm

Rotating disk sand

2×1.5 kw 13×Φ180mm

Sand abrasive belt brush roller

2×3 kw Φ380×1300mm

Dust collector roller

1.1 kw Φ160×1300mm

Vacuum cleaner

Φ125×12个

Total power

24.8KW/380V 50HZ

Outline dimension

Long6200×Wide2170×High2000mm

Weight

5500kg


1. The equipment warranty.

Our company's equipment from the date of sale and installation of the main components (except for wearing parts, such as bearings, V-belts, flat belts, switches, buttons, fuses, carbon brushes, etc.) warranty December.


2. The daily maintenance requirements of equipment

(1) Read the operation manual carefully before operation, follow the maintenance instructions of the operation manual, check the pressure pressure, power supply voltage, and power supply for the lack of equality before starting the machine.

(2)It is strictly forbidden to use machinery overloaded, which may cause damage to machinery and electrical appliances.

(3) After each work shift, it is necessary to clean the whole machine to avoid the clogging of wood scraps, wood chips, rafts and debris, which will affect the normal operation of the machine and the normal operation of the electrical appliance and cause malfunction.


3.Equipment installation and debugging.

Provide equipment installation and commissioning and operator training.



Causes of Common Failures and Solutions

1. No power display on operation panel

Cause split: 1. The power switch is not turned on.

Solution: Turn on the power switch.

Cause split: 2. Control cabinet switch off.

Solution: Check the circuit and close the switch.


2. Phase Sequence Error

Reasons split: 1. The first power-on of the new machine will be displayed.

Solution: Three-phase power supply switching between any two phases.


3. Abnormal Plate Thickness

Reasons split: 1. Workpiece placed in worktable is too thick, safe feeding baffle: when the workpiece exceeds the set thickness of 5 mm or when the workpiece is carelessly dragged into the conveyor by hand, the red baffle will start feeding protection function, and the equipment will stop and alarm to ensure safety. The operation screen will show abnormal thickness.

Solution: Removal method is to lift the main lifting by touching the manual button on the page in the functional interface, and then take out the workpiece.



the cross sand components

Functional features: The elastic belt supported by the brush is composed of a spiral flexible sanding unit, and the direction of rotation and the moving direction of the workpiece are 90 degrees. The left and right movements are moved at a constant speed, and the sanding intensity, depth and speed are all digitally adjusted. Stepless speed regulation. The mechanical structure is pulled out and the abrasive replacement is quite convenient. This part is mainly used for sanding and painting of paint and white billet for uneven workpieces with lateral ends. The depth of the depression is determined by the width of the abrasive.


 the spiral sand roller.

Functional features: The elastic belt supported by the brush is composed of a spiral flexible sanding unit, and the rotation direction is parallel to the moving direction of the workpiece. The oscillation is oscillated from side to side, and the sanding intensity, depth and speed are all digitally adjusted. Stepless speed regulation. The mechanical structure is pulled out and the abrasive replacement is quite convenient. The large-diameter sand roller has increased contact with the workpiece to effectively increase the sanding effect. This part is mainly used for sanding and painting of paint and white billet for uneven workpieces with forward corners. The depth of the depression is determined by the width of the abrasive.


the disc part.

Functional features: The flexible sanding unit consisting of the elastic belt supported by the brush is mounted on a rotating flat disk, and the direction of rotation and the moving direction of the workpiece are 360 degrees. The oscillation is oscillated from side to side, and the sanding intensity, depth and speed are all digitally adjusted. Stepless speed regulation. The mechanical structure is pulled out, the whole unit is quickly and independently removed, and the abrasive replacement is quite convenient. This part is mainly used for sanding and polishing of paint and white billet for all rugged workpieces (called universal angle grinder). The depth of the depression is determined by the width of the abrasive.


http://www.sandwell-sand.com/